Material//AES resin
Dimensions: Width: 25mm x Height: 100mm x Thickness: 25mm, Weight: 0.028kg
Dimensions //
Specifications // JB Aluminum Side Bumper for 100H, Color: Gray, Fits into the cutout of the main body

[Product Features]
This is an aluminum side bumper kit. You can create your own side bumper by combining parts. The JB Aluminum Side Bumper Short Corner for 100H is a cap that fits over the cut area of the aluminum side bumper when the toolbox lid or the arm of the gate opening/closing assist device interferes with the main body of the bumper.

[ JB Aluminum Side Bumper Assembly Instructions ]

To attach the JB aluminum side bumper body to the corner section, insert one M8 x 20 hex bolt into the corner section, insert it from the end of the body, cover the corner back plate (for aluminum extrusions), and secure the bolt with an M8 hex nut, M8 spring washer, and M8 flat washer. (Please use a JIS M8 hex bolt.)

[Notes]
* The M8 x 20 hex bolts, M8 hex nuts, M8 spring washers, and M8 flat washers required for assembling the JB aluminum side bumper are not included. Please prepare these items yourself.
When installing, secure with adhesive or rivets to prevent it from falling off.
〇This product should be used as a safety measure for the cut areas of JB aluminum side bumpers.
○Please install in accordance with vehicle safety standards.

[ Example of JB Aluminum Side Bumper installation on a vehicle ]

◆Please be sure to read
*This product is a special order item.
*This product cannot be returned. Thank you for your understanding. ⇒About cancellations and returns

Write a review!