Special lock, special rivet, special bolt
Special bolts and special rivets are bodywork parts used to fix tilt hinges, tilt opening and closing auxiliary devices, truck interior materials and floorboards. We also offer special bolts and special rivets specifically for truck mounting, which are not generally available.
Special bolts and special rivets are essential parts for fixing body parts
Special bolts and special rivets are all parts used for fixing truck body parts.
The body of the truck has a special structure depending on the location, and it may not be possible to fix equipment and parts with general bolts. Therefore, these special bolts and rivets are required. Special bolts and special rivets also include products aimed at improving work efficiency.
ST lock (cargo lock) is a special bolt that is fixed by crimping like a rivet. For example, when attaching tilt hinges or tilt opening and closing auxiliary devices to aluminum block tilts, it may not be possible to attach nuts from the back due to the structure. In such a case, fix it with ST lock.
Wafer self-drilling is suitable for fixing plywood for the interior of aluminum vans and wing cars. Wafer self-drilling is a product called a one-shot screw that can be drilled and fixed at once. Compared to the process of making pilot holes with a drill while being careful not to make holes in the exterior panels, and then bringing a riveter to rivet, the work efficiency has doubled and tripled. increase. Wafer self-drilling cannot be performed with general bits, so please use special bits.
In addition, the countersink tapping countersunk groove cut with Torx hole is an excellent product for installing floorboards. With this product, the tapping countersunk grooves perform the "countersink groove cut" that is necessary in advance when screwing. This product is also a product that increases work efficiency. You will also need a special bit.
Please select special bolts and special rivets according to your application.
At Yamada Body Works, we also have a "flange nut" for fixing the tilt hinge to an aluminum block tilt that has no back plate, a "vertical joist bolt" for fixing the vertical joist and the horizontal joist, and a large load and vibration. We offer special bolts and rivets specifically for truck mounting, such as "monobolts" for fixing lashing rails and "waterproof rivets" for fixing exterior aluminum panels. These are dedicated products for each application, so please select according to the application.
Some special bolts and special rivets require special bits and special tools. Some products have alternative mounting methods, but for tools that we do not handle, please contact your tool dealer.