curtain rail parts
This is a category of parts for mounting a flat body, etc. on a curtain car. A curtain car consists of various parts such as "curtain rail", "curtain roller/car", "bracket" and "stopper".
Types of curtain rails and applicable carrier sizes
Cargo such as "newspapers" and "flyers" is transported by small trucks with open sides. At this time, there is an option to use a wing car, but there are disadvantages such as the wing is expensive because there are few settings for a small finished car and a space is required above to open the wing. In order to compensate for this, there is an example of mounting a flat body on a curtain car. The flat body is inexpensive because the base body is a mass-produced product, and is suitable for remodeling into a curtain car.
When mounting a flat body on a curtain car, there are two types of base bed sizes: 10-shaku body with a bed length of 3050mm and 14-shaku body with a bed length of 4350mm. In the case of a 10-shaku body, it is common to combine Fedepolymer-made press-type curtain rails, ceiling brackets, stage runners (curtain rollers), and stoppers. Fede Polymer Blue products are for indoor use and the runners are not strong because they are made of resin. Therefore, the size of the truck that can be used is suitable up to 10 shaku body with light curtain sheet weight. In this case, you should install the stage runners at about 1 point per 30 cm.
Even with a 14-shaku body or a 10-shaku body, if the vehicle height is high and the weight of the curtain is heavy, Daiken iron curtain rails and single bearing wheels are often combined. Daiken's products are strong because they are made of iron and ball bearings are incorporated in the bearings. In this case, you should install a motorcycle in about 1 place in 50 cm.
curtain rail parts
Yamada Body Works handles not only Daiken motorcycles but also external products such as "bearing rollers" and "curtain rails". This makes it possible to mount a curtain car at a low cost.
In addition, we sell the "Ceiling Bracket", "Stage Runner", and "Stopper" of Fede Polymer Blue in units of one. In particular, the "Stage Runner" is made of resin, so it may wear out after long-term use of the curtain sheet, causing it to stop working or fall off. If you discover wear during regular inspections, be sure to replace them as soon as possible.