Single tail lamp

From a safety standpoint, it is necessary to choose tail lamps with excellent visibility to prevent rear-end collisions with following vehicles. A long time ago, tail lamps were mainly incandescent lamps (light bulbs), but now they are changing to LED types. In this category, we handle types that can be purchased separately for repairing tail lamps.

Safety standards for truck tail lamps

Taillights are an important part that informs the vehicles behind you of your vehicle's presence, so strict safety standards are established. Specifically, it must be visible at night from a distance of 300 meters behind the vehicle and must not interfere with the driving of the following vehicle. In this way, it is not enough to simply have a large amount of light, but it is necessary to choose a tail lamp with a light amount that also considers the surrounding cars.

In addition, the safety standards were revised in 2012, and new registrations (including second-hand cars) after January 1, 2012 are required to be equipped with tail lamps that meet the following requirements.

Change in the number of tail lights, brake lights, and direction indicators * From 2 or 4 to 2 for tail lights and brake lights, and from 1 to 1 on each side of the rear of the vehicle for direction indicators change
Must be E-marked (ECE certified product)

As a result, the method of arranging multiple single tail lamps is not approved. LED tail lamps with a structure that looks like a combination of single units are also approved as a single unit, and the method of arranging multiple single LED tail lamps for repair is not approved.

Please note that the "tail lamp unit" that is handled by Yamada Body Works is only for repair or repair replacement.

Type of repair tail lamp unit

There are incandescent lamp (light bulb) type and LED type for repair tail lamp alone.

Products with incandescent lamps without the E mark are products before the 2012 or 2006 safety standards revision. It can be used for repairing tail lamps that have been installed in continuous vehicle inspections before the revision of safety standards.

On the other hand, LED or incandescent lamp type products with the E mark are products after the safety standards were revised in 2012. This product complies with the vehicle inspection with the tail lamp integrated. For repairing the target tail lamp, please use the tail lamp alone to comply with safety standards.

The "repair tail lamp unit" that is handled by Yamada Body Works is all a product of JB (Japan Body Parts Industry). Please check the tail lamp to be repaired and select the repair tail lamp alone.

Sort by