JB Aluminum Side Bumper End Cap Stainless Steel for 100H

商品説明

Material // Stainless steel SUS304
Dimensions // Width: 23.9 x Height: 96.4 mm, Thickness: 1.0 mm, Weight: 0.037 kg
Dimensions //
Surface treatment // #400 polishing
Specifications // JB Aluminum Side Bumper for 100H, fit into the cut part of the body and rivet in place

[Product Features]
This is an aluminum side bumper kit. You can assemble your own side bumper by combining parts. The JB Aluminum Side Bumper End Caps (Stainless Steel) for 100H are designed to cover the cut portion of the aluminum side bumper when the toolbox lid or the arm of the tilt opening/closing assist device interferes with the main body of the bumper. Secure them in place with rivets.

[ JB Aluminum Side Bumper Assembly Instructions ]

To attach the JB aluminum side bumper body to the corner section, insert one M8 x 20 hex bolt into the corner section, insert it from the end of the body, cover the corner back plate (for aluminum extrusions), and secure the bolt with an M8 hex nut, M8 spring washer, and M8 flat washer. (Please use a JIS M8 hex bolt.)

[Notes]
* The M8 x 20 hex bolts, M8 hex nuts, M8 spring washers, and M8 flat washers required for assembling the JB aluminum side bumper are not included. Please prepare these items yourself.

[ Example of JB Aluminum Side Bumper installation on a vehicle ]