Material: Body: ABS resin, Lens: PMMA (acrylic)
Dimensions // Length: 150 x Width: 28 x Height (without bolts): 23.5mm, Mounting pitch: 135mm, Weight: 0.055kg
Dimensions //
Surface treatment // Chrome plating
Specifications//Rated voltage: DC12/DC24V, Allowable voltage range: DC10V to DC40V, Power consumption: 2.2W, Current: 12V-0.17A 24V-0.1A, Operating temperature: -20℃ to 50℃, Waterproof performance: IP65, Luminous flux: 91.8 lumens, With waterproof connector (separate harness required)
JAN code: 4909002933452

[Product Features]
■ Vehicles newly registered after September 15, 2020 will be required to have license plate lights that meet the technical standards of ECR R4. The LED license plate light LSL-1014AV ECE certified (compatible with DC12/24V) with waterproof connector is a license plate light that meets the standards and is vehicle inspection compliant. This product is equipped with a waterproof connector . By combining it with a dedicated harness, wiring and waterproofing can be done at the same time. This leads to reduced work time and labor .
■Certified for ECE R4 Category 2a and 2b
Approval number: E13*4R00/19*35417*00

[Notes]
■When installing on a vehicle, please strictly adhere to the positional relationship and incidence angle specified at the time of ECE standard certification. (Do not change the positional relationship with the license plate or incidence angle.)
■Depending on the vehicle model, the bulb detector may light up when this product is installed. In this case, please use a resistor or other device to match the power consumption of the genuine license plate lamp.

◆Please read
*This product is a special order item.
*This product cannot be returned. Thank you for your understanding. ⇒About cancellations and returns

Write a review!