Proceed to Checkout 
Wish List(0) 
Cart(0)
My Account 
Dimensions: Width: 22.8 x Height: 41.8 mm
Dimensions // 
Wiring example // 
Specifications//Rating: DC12-24V-10A, for Fuso Canter (November 2010 -) *Canter (February 2024 -): Cannot be installed
To connect, please use two of these harnesses and one DC24V or DC12V relay for each switch.
Cab switch harness, 4 wires
General purpose relay ACA1223(DC24V)
General purpose relay ACA1213(DC12V)
*Please make sure there is no coil load (large capacity motor, solenoid, coil clutch, etc.).
[Notes when selecting relays]
Starting with the 2015 model Bluetec Canter, the standard voltage has been changed to DC12V. However, as an extra manufacturer option, the body power supply can be changed to DC24V, so when selecting relays, switches, and lamps, you need to check the power supply voltage more carefully than ever before . In particular, relays and lamps can be damaged or cause a fire if used at a different voltage. Be sure to use the correct specifications.
*For Bluetec Canter models before 2014, the power supply inside the cab (audio, ETC, navigation, taillights, etc.) was DC12V, while the power supply for the bodywork was DC24V.
[Specification details]
Rating: DC12~24V-10A
Contact resistance: Initial value 20mΩ or less (not including cord)
Insulation resistance: 10MΩ or more at DC500V Withstand voltage: Withstand AC500V for 1 minute
Operating load: 0.7±0.3Kg･f
Operating voltage range: DC12 to DC28V
Operating temperature range: -20℃ to 60℃
*ELV compatible product
[Installation precautions]
●Canter (from February 2024): Cannot be installed.
● Always use relays for switches inside the cab.
● Make sure there is no coil load (large capacity motor, solenoid, coil, clutch, etc.).
*Please check the [wiring example].
◆Please read
⇒About cancellations and returns
Notice from e-Concierge
Knowledge base articles related to the product
Other related articles
No review on this item...
