Hino light switch in the cab for the shoulder JB-5303

商品説明

Dimensions: Width: 24.5 x Height: 42.4 mm
Dimensions //
Wiring example //
Specifications//Rating: DC24V10A, for Hino (4t, large), *May 2017 onwards: Only some parts below the steering wheel are compatible

To connect, please use two of these harnesses and one relay for each switch.
Harness for cab switch, 4 wires
General purpose relay ACA1223(DC24V)

[Product Description]
This is a cab switch that fits the fitting specifications of the cabin switches of Hino Motors' medium and large trucks. For Hino Motors' medium and large trucks that have undergone a full model change since May 2017, it only fits some of the left and right areas under the steering wheel. For details on the fitting locations, please check the e-concierge knowledge database at the bottom.

[Installation precautions]
● Always use relays for switches inside the cab.
● Make sure there is no coil load (large capacity motor, solenoid, coil, clutch, etc.).
*Please check the [wiring example].

◆Please read
⇒About cancellations and returns