Dimensions // Length: 335.4 x Width: 39.8 x Thickness: 30.5 mm, Mounting pitch: 300 mm
Dimensions //
Specifications//Rating: 24V 0.14W (car height light)/1.6W (stop light)/2.6W (turn light), sequential, UN (ECE) certified parts
JAN code: 4961065212660

[Product Introduction]
Installed on the top of the vehicle, it works in conjunction with the rear combination lamps to turn on the vehicle clearance lights, stop lights, turn lights (when turning right or left), and hazard lights. It quickly alerts surrounding vehicles and pedestrians that you are changing lanes or stopping, helping to prevent accidents involving collisions. This product is sequential, and can now be synchronized with the rear combination lamps for sequential turns.

[Notes]

• *Due to changes in regulations, it has become mandatory for vehicles produced after February 10, 2019 that the rear turn signals of mandatory lamps (rear combination lamps) and additional rear turn signals must operate in the same lighting mode (sequential or normal flashing), so please select according to the lighting mode of the mandatory lamps.
• * Cannot be installed vertically.
• *If you install this product together with the Koito All-LED Rear Combination Lamp (Kabuki Design/3-row Type/2-row Type), if you use the optional item ( Koito LED Car Height Light & Stop Lamp Branch Harness LEDTOP-HIK , Koito LED Car Height Light & Stop Lamp Intermediate Harness LEDTOP-CH ) sold separately, the harness on the vehicle side will not need to be modified.
• * For wiring of unused functions of Koito LED car height lamp & stop lamp intermediate harness LEDTOP-CH , please process the terminals to prevent water from entering.
• *If you use the Koito LED height lamp & stop lamp intermediate harness LEDTOP-CH , we recommend that you also use the Koito LED height lamp & stop lamp branch harness LEDTOP-HIK at the same time.
• *This product cannot be used with passenger cars with 9 or fewer occupants, cargo cars with a total vehicle weight of 3.5 tons or less, towed cars with a total vehicle weight of 750 kg or less, or other vehicles equipped with high-mounted stop lamps.
• *When installing on a vehicle, please be sure to install the lights symmetrically on both sides of the specified positions in accordance with the safety standards: "Ground clearance: The highest possible position of 600mm or more from the light-emitting part of the mandatory lamp (rear combination lamp)" and "Tail/stop lamps: Within 400mm from the outermost end of the vehicle to the light-emitting part."
• *Before using this product, be sure to read the instruction manual included with the product and use it correctly after understanding its contents.

◆Please read
*This product is a special order item.
*This product cannot be returned. Thank you for your understanding. ⇒About cancellations and returns

Write a review!