JB cab switch width light JB-6602 for Fuso large vehicles (from May 2017), medium vehicles (from October 2019), and small vehicles (from February 2024)

商品説明

Dimensions // Width: 21.7 x Height: 41.4 mm
Dimensions //
Wiring example //
Specifications: Switch type: Seesaw switch, Switch classification: ON-OFF, Rating: DC24V-10A, Indicator: Parking lights-OFF, Built-in LED, For Fuso large (May 2017 onwards), medium (October 2019 onwards), and small (February 2024 onwards), *Uses dedicated harness JB-65-66

[Product Description]
This is a type of switch that is inserted into a switch mounting hole on the driver's dashboard, etc.
〇It has a built-in LED, so it will light up in conjunction with the small light or ON-OFF depending on the wiring specifications.

[Points to note]
When installing a JB in-cab switch for Fuso large (May 2017 onwards), medium (October 2019 onwards), or compact (February 2024 onwards) , be sure to use the JB in-cab switch harness JB-65-66, designed specifically for Fuso large (May 2017 onwards), medium (October 2019 onwards), and compact (February 2024 onwards) . If you use the JB in-cab switch harness 4-wire JB-503 , the coupler will not lock and the harness will come off.
JB in-cab switch harness JB-65-66, exclusively for Fuso large (from May 2017), medium (from October 2019), and small (from February 2024), uses a crimp terminal with a lock. When attaching to the switch, be sure to push it in firmly until it locks. Once attached to the switch, the crimp terminal cannot be removed. Forcing it out may cause damage, so please be careful when working with it.

*To connect the JB in-cab switch JB-66 series for Fuso large (from May 2017), medium (from October 2019), and compact (from February 2024), use one " JB in-cab switch harness JB-65-66 for Fuso large (from May 2017), medium (from October 2019), and compact (from February 2024) " for each switch, one DC24V relay " general-purpose relay ACA-1223 CA1a (DC24V) ", and a relay harness " JB in-cab switch harness 4 wires JB-503 ".

[Installation precautions]
● Always use a relay for the switch inside the cab.
●Make sure that there is no coil load (large capacity motor, solenoid, coil, clutch, etc.).
*Please check the [wiring example].

◆Please be sure to read
⇒About cancellations and returns