Dump intermediate metal fittings for 2t and 4t New plated pins and pin reception

商品説明

Material: Iron
Dimensions/Weight: 1.088kg
Dimensions //
Surface treatment: Body: Black coating, Pin: Plating, Pin holder: Plain
Specifications // For 2t and 4t dump trucks, plated pins and pin receivers

[ Video introducing how to install the new plated pins and pin receivers for 2t and 4t dump truck intermediate fittings (5 minutes 14 seconds/with music)]

A thorough explanation of how to install the new plated pins and pin receivers for 2t and 4t dump truck intermediate fittings. We will explain step by step how to use the dump truck intermediate fittings mounting jig and how to install the included pin receiver pipe .

[Product Description]
This part is installed under the rear tailgate of the dump truck. It prevents the tailgate from falling even if the upper receiver lock is released and the dump truck is lifted up.
*Please note that if the axis of the automatic pawl shaft and the axis of the pin of this product are not aligned when installing, the tailgate will not open properly.
Price is for 1 piece.


[Pin and pin receiving pipe]	[Pin stored in the pin receiving pipe]

* A pipe for storing the pin is included in the kit.
As you can see in the image, it can be stored smoothly without too much play or tightness. Also, the tip is cut to a length that allows it to bend, so it won't fall off even when the car bounces while driving.

[Plated pin]

* The pins have been plated.
Conventional pins were made of plain steel (iron material), so even if they were painted they had the disadvantage of rusting easily after repeated use. The new pins have been plated, so they are less susceptible to rusting than conventional products.

[Specification change history]
■April 6, 2018: 〇Pin receiving pipe included ■November 5, 2020: 〇Pin surface is plated

◆Please read
⇒About cancellations and returns