Aoribaransasupuringu JB W13

商品説明

Material: Body: iron, case: resin
Dimensions // Wire diameter: φ13, Weight: 3.80kg
Specifications // Spring: Blue

JB Aori balancer spring

◆Please read
⇒About cancellations and returns

Spring selection conditions

Model				W13	M14	R16
Tilt load conversion moment (kg.m)				12～24	19～34	33～50
Spring Specifications				φ13	φ14	φ16
Tilt specifications and applicable tilt length
sign	Material/Structure	Height (mm)	Unit weight (kg/m)	JB Tilt Balancer Tilt Length per Unit (m)
(1)	wooden	400	18	3.0–6.0	4.8–8.6	8.3 to 12.6
(2)	(1)+400H (with auxiliary tilt)	400+400	18+10	×	×	3.2–4.9
(3)	wooden	450	twenty two	2.2–4.5	3.5–6.3	6.1–9.3
(4)	(3)+450H (with auxiliary tilt)	450+450	22+12.5	×	×	2.3–3.6
(5)	Aluminum Block	600	11	3.4–6.4	5.4–9.7	9.4 to 14.2
(6)		700	12.5	2.6–5.2	4.1–7.4	7.1 to 10.8
(7)		800	14	2.0–4.0	3.2–5.8	5.6-8.

*Reference value: lashing rail unit weight3 (kg/m)

[Selecting a tilt balancer model]
Please see the table.
Please check three points: the material and structure of the truck's tailgate, the tailgate height, and the tailgate length.
Select the item that matches your conditions from ① to ⑦ in the left column based on the gate material, structure, and gate height.
Select the spring that intersects with the "Model" in the table based on the tilt length.

Example: 4t standard body (without crane), installation conditions: tilt step amount 0mm, floor frame height 100mm
○Tilt material and structure: Aluminum Tilt ○Tilt height: 600mm
○Tilt length: L=6.2M

Due to the installation conditions, the main unit is JB23003D.
Select item ⑤ based on the gate material, structure, and gate height. The gate length is 5.4 to 9.7 m, so select the spring M14.
(If the tilt length is at the boundary, it is safer to choose a thicker spring.)

*If a steel lashing rail is installed, the unit weight per meter will increase by 3 kg. In the above example, select item ⑦ based on the unit weight. Based on the flap length, the spring selection is R16.