Road light switch in the cab for the Fuso JB-5502

商品説明

Dimensions: Width: 22.8 x Height: 41.8 mm
Dimensions //
Wiring example //
Specifications//Rating: DC24V-10A, for Fuso (4t, large) *Large (from May 2017) and medium (from October 2019): Cannot be installed, Generation Canter 24V vehicles must be used with bracket JB-502
*Cannot be installed on large Fuso vehicles (from May 2017) or medium Fuso vehicles (from October 2019).

To connect, please use two of these harnesses and one relay for each switch.
JB cab switch harness 4 wires JB-503
General purpose relay ACA1223(DC24V)
For Generation Canter 24V vehicles manufactured from July 2002 to October 2010, please use the following base bracket together with the switch.
Bracket for cab switch for Generation Canter

[Installation precautions]
● Always use relays for switches inside the cab.
● Make sure there is no coil load (large capacity motor, solenoid, coil, clutch, etc.).
*Please check the [wiring example].
*Cannot be used with Bluetec Canter models manufactured from November 2010 onwards.

◆Please read
⇒About cancellations and returns