Material: Iron
Dimensions // Arm length: 300mm, Tilt projection: 9.8mm
Specifications//Installation conditions: Tilt step amount 10 to 25 mm

[Product Description]
The Seiko Rack SRN700 gate opening and closing auxiliary device is designed to be compact and take up little space, reducing interference with side bumpers and fuel tanks, making installation and handling easier. It is ideal for vehicles with little installation space under the bed of large low-bed trucks, medium-sized trucks, and small trucks. The gate opening and closing auxiliary device assists the force applied when opening and closing the gate of a truck, making it easier to open and close the gate. If there is a problem with the overall width limit (overall width: must not exceed 2500 mm) for a reverse hinge gate and the thin type cannot be used, the ultra-thin type is used. The ultra-thin type protrudes less from the vehicle by 12.9 mm (25.8 mm when installed on the left and right) compared to the normal type, and 3 mm (6 mm when installed on the left and right) compared to the thin type. This product has an arm length of 300 mm and is compatible with large floor frames (frames) such as trailers.

[ Installation example of Seiko Rack SRN700 ultra-thin trailer ]

◆Please read
*This product is a special order item.
*This product cannot be returned. Thank you for your understanding. ⇒About cancellations and returns

○ Seiko Rack SRN700 Ultra-thin Body Model Selection Table

○ Seiko Rack SRN700 Series Spring Selection Table

Write a review!