Dimensions: Width: 21.7 x Height: 41.4 mm
Dimensions //
Wiring example //
Specifications// Switch type: Seesaw switch, Switch classification: ON-ON step type, Rating: DC24V-10A, Display: No text, Built-in LED, For Fuso large (May 2017 onwards), medium (October 2019 onwards), and small (February 2024 onwards), Step type, *Uses dedicated harness JB-65-66

[Product Description]
*This type of switch is used by fitting it into a switch mounting port on the driver's dashboard, etc.
* When connected to the ON-ON switch, it becomes a staircase type. The LED lights up when the interior light is on. The LED goes out when the switch is turned off, regardless of whether it is in the cab or on the loading platform.

[Points to note]
〇 When installing the JB cab switch for Fuso large vehicles (from May 2017), medium vehicles (from October 2019), and small vehicles (from February 2024), be sure to use the JB cab switch harness JB-65-66, designed specifically for Fuso large vehicles (from May 2017), medium vehicles (from October 2019), and small vehicles (from February 2024) . If you use the JB cab switch harness 4-wire JB-503 , the coupler will not lock and the harness will come off.
JB cab switch harness JB-65-66 For Fuso large vehicles (from May 2017), medium vehicles (from October 2019), and small vehicles (from February 2024), a crimp terminal with lock is used. When attaching to the switch, be sure to push it in firmly until it locks. Once attached to the switch, the crimp terminal cannot be removed. If you try to remove it forcibly, it may be damaged, so please be careful when working.

*To connect the JB in-cab switch JB-66 series for Fuso large (from May 2017), medium (from October 2019), and compact (from February 2024), please use one " JB in-cab switch harness JB-65-66 for Fuso large (from May 2017), medium (from October 2019), and compact (from February 2024) " for one stitch, one DC24V relay " General-purpose relay ACA-1223 CA1a (DC24V) ", and a relay harness " JB in-cab switch harness 4-wire JB-503 ".

[Installation precautions]
● Always use relays for switches inside the cab.
● Make sure there is no coil load (large capacity motors, solenoids, coils, clutches, etc.).
*Please check the [wiring example].

◆Please read
*This product is a special order item.
*This product cannot be returned. Thank you for your understanding. ⇒About cancellations and returns

Write a review!