Seiko rack body SRN700 A180 GA11-A1181 common type
Material // steel dimension // arm length: 180mm, tilt amount of projection: 22.7mm
Specifications // installation conditions: tilt stepped amount of 0 ~ 20mm
※ Seiko rack body (non-consolidated). Spring is not included.
◆ Please be sure to read
※ This product is your obtaining goods.
※ This product is returned goods are not allowed. please note that. ⇒ about cancellation returned goods
Body selection table of ○ Seiko rack SRN700 common type
|Tilt stepped amount mm||Arm A length mm|
|Floor frame dimensions mm||37-77||35 to 75||33-73||30 to 70||28-68||180|
|57-97||55-95||53-93||50 to 90||48-88||200|
|67-107||65-105||63-103||60 to 100||58-98||210|
○ Seiko rack SRN700 series spring selection table
|Tilt load in terms of value||KN ? m||98-167||157-235||216-382||363-495|
|kgf ? m||10-17||16-24||22-39||37 to 50.5|
|Seiko rack one per tilt length (m)|
| Wood (height) 400mm |
Unit weight 18kg / m
|2.5 to 4.3||4.0 to 6.1||5.6 to 9.8||-|
| Aluminum block (height) 1000mm |
Unit weight 17kg / m
|1.1 to 1.9||1.8 to 2.7||2.5 to 4.4||4.2 to 5.7|
No review on this item...
Tell your friend about this product. Fill the form below and click the 'Send' button.